Published On Jan 12, 2021
Correction 1:
I recommend you use a different gasket maker than I am using on the crank case halves. Alternatives can be permatex motoseal and yamabond 4 or other higher quality gasket makers.
Correction 2:
In the manual it says to replace the o-rings and use grease for the oil tubes (11:05). I and many other people experience leaks from this location after doing this. I recommend using plenty of gasket maker at this location all around the o-rings.
Correction 3:
At 10:50 I mention the tool used to install the piston rings recommended in the Haynes manual. I have since used it and do not recommend it. It’s much easier to do it by hand with very small screwdrivers.
show more