A quick video on how to replace worn hinge pins and bushings on the Chevrolet S-10 Pickup. Helps fix the sag in the door and having to slam or lift the door all the time. Be careful when both pins are out, because the door can drop. With the door roller spring you can also pry it out and then clamp it in a vice and loop some steel wire through the coil spring, to hold it tight together, and then cut the wire when it is in place, but wear goggles as the spring can fly out. Do not use copper wire. It will break. Hinge pin kit used is Dorman part number 38419. 2 Kits are required. This repair took about an hour and a half. With a helper it would have gone a bit quicker.