Buy Now!
New Wheel Bearing Set from 1AAuto.com http://1aau.to/ia/1ASHS00641

If you hear a grinding or groaning noise while your vehicle is rolling, it might have a worn out wheel bearing. A worn bearing can allow the wheel to wobble, creating a host of other issues. To save yourself from more headaches down the road, replace your bearing right away. This video shows you how to install a new TRQ wheel bearing on your 1998-2005 Lexus GS300.

• Check here for more videos on the 1997-2005 Lexus GS300:    • Lexus GS300 1998-2005 2nd Gen S160  

This process should be similar on the following vehicles:
1998 Lexus GS300
1999 Lexus GS300
2000 Lexus GS300
2001 Lexus GS300
2002 Lexus GS300
2003 Lexus GS300
2004 Lexus GS300
2005 Lexus GS300

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oh7/1AXAA00013
• Pry Bar http://1aau.to/obX/1AXAA00020
• 10mm Socket http://1aau.to/ogJ/1AXAA00017
• 17mm Socket http://1aau.to/ohR/1AXAA00015
• 36mm Socket http://1aau.to/oj/1AAST00006
• Ball Joint Press
• Brake Caliper Hanger http://1aau.to/oz/1AXAA00084
• Press
• Needle nose pliers http://1aau.to/oaX/1AXAA00051
• Needle nose pliers http://1aau.to/oaX/1AXAA00052
• Pliers
• Snap Ring Pliers
• 1/2 Inch Air Impact Gun http://1aau.to/oaf/1AXAA00252
• Air Chisel http://1aau.to/oh/1AXAA00270
• 1/2 Inch Breaker Bar http://1aau.to/oak/1AXAA00078
• Ratchet http://1aau.to/oiI/1AXAA00016
• Torque Wrench http://1aau.to/oeY/1AXAA00044
• Bearing Grease
• Block of Wood
• Brake Grease
• Marker / Writing Utensil
• Rust Penetrant
• Sandpaper
• Center Punch http://1aau.to/oX/1AXAA00055
• Hammer http://1aau.to/obN/1AXAA00091
• Magnet - Extendable
• Reciprocating Saw
• Wire Brush http://1aau.to/oao/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Lexus GS300 1997-2005 2nd Gen S160:    • Lexus GS300 1998-2005 2nd Gen S160  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.